customglass.dreamline.comShower Doors, Tub Doors, Shower Enclosures, Glass Shower Door, Shower Cabins, Shower Columns - Custo

mglass Build your Ultimate Shower Door Find an Installer Products Shower Doors Tub Doors Shower Enclosures DreamLine Product 360 Display Fully immerse yourself in The Ultimate Shower Door Experience with DreamLine Unidoor-X Unidoor X Shower Door 360 Display Unidoor-X Unidoor X Shower Door 360 Display Unidoor Plus Shower Door 360 Display Unidoor Plus Unidoor Plus Shower Door 360 Display Unidoor X Enclosure 360 Display Unidoor-X Unidoor X Enclosure 360 Display Load More Q&A Section Q: How do I know what size shower door I need for my opening? Ordering the correct size shower/tub door is extremely important for a proper installation. Measuring must be done after the tile or finished wall material has been installed. Check to ensure that your walls are plumb and that your shower base/tub or flat surface shower floor is level. Please refer to our Finished Wall Dimensions” page for measuring instructions. DreamLine has many models that will work with out of plumb conditions while others are more specific and require plumb walls for installation. Please read the Product Description for out of plumb requirements for the shower door you are interested in. Q: Where can I purchase the plumbing fixtures or tile shown in the pictures of your shower doors? A: The plumbing fixtures and tiles shown in the pictures are not a specific manufacturer’s product and are used as graphic representations only. At this time, DreamLine does not manufacture plumbing fixtures or tile products. Q: What should I use to clean my DreamLine shower door? A: We recommend removing water with a glass squeegee or soft cloth after each use to avoid water spots. Clean your door with a soft cloth and a mild soap, such as a liquid dish soap. Do not use any abrasive or harsh cleaners. Q: What does frameless and semi-frameless mean? A: All of DreamLine’s shower doors are made of frameless, tempered glass panels. Shower door models with the ability to adjust for out of plumb conditions will feature a framed perimeter and are considered to be semi-frameless as the glass panels themselves, do not have frames. Q: What size shower base do I need for my shower enclosure? A: All of our shower enclosure models that have matching shower bases will be 2 inches smaller than the corresponding shower base to allow for proper installation. For example, if you are looking at a 34x34 inch shower enclosure, the corresponding shower base will be 36x36 inches. Q: Are your shower doors reversible? A: Most DreamLine doors are reversible. However, a few doors are specifically made for left or right installation. The products that are not reversible will specify the installation side within the specifications. Feel free to contact our Customer Support technicians with any questions you may have. Q: Can I purchase just the hardware for this shower door? A: At this time, hardware is not available for individual sale. Q: Can I purchase just a stationary panel from model x”? A: At this time, glass panels are not available for individual sale. Q: What is the difference between a pivot and a hinged shower door? A: A hinged door is attached directly to the wall or stationary glass and opens like an interior door in your house. Hinges attached directly to walls require studs behind the finished walls. A pivot door has a pivot assembly that is attached to a wall profile system that is attached to your finished wall. The pivot assembly attaches to the glass at the top and bottom much like a refrigerator door. It does not require studs behind the finished walls for installation. Q: What is a bypass sliding door? A: Two glass doors that slide to bypass each other to allow access from either the right or left of the shower space. Q: Do any of your models have a protective glass coating? A: Yes, most of our doors feature ClearMax glass protection which helps prevent the buildup of hard water and lime scale. Check out our product pages to see if ClearMax is included. Q: Will the shower base from brand X” work with your shower enclosure? A: Most square and rectangular shower bases will work with our shower enclosures. However, DreamLine’s Neo-Angle and Quarter Round shower bases are specifically designed for our Neo-Angle and Quarter Round shower enclosures. Please keep in mind that the shower base is approximately 2 inches larger than the shower enclosures. This is because your base is installed to your studs, while the shower enclosure is installed to your finished walls. Q: What are the differences between Unidoor, Unidoor Plus, Unidoor Lux, and Unidoor-X? A: The Unidoor can be a single moving glass door or a moving door and stationary glass panel combination. The moving door panel is attached to the wall with hinges and the stationary panel is attached to the wall by a wall and glass profile system. The wall profile is 2" wide and is attached to your wall. The glass profile is first attached to your glass, then you slide this panel into the wall profile. You adjust the panel to your width and plumb specifications this way. The Unidoor has the ability to be adjusted within a 1” range. The Unidoor is a semi-frameless unit. The Unidoor Plus is a moving glass door attached to the wall with hinges and a glass panel attached to the wall with a "U-Channel". The "U-Channel" is a metal frame, 1"wide and the stationary panel slides into it, giving a more frameless look than the Unidoor. The Unidoor Plus has the ability to be adjusted within a ½” range only. The Unidoor Plus is a semi-frameless unit. The Unidoor Lux is a moving glass door attached to the wall with hinges and a stationary glass panel attached to the wall with wall brackets". Wall brackets look very similar to hinges, but they do not move. The Unidoor Lux is a completely frameless unit with no out-of-plumb adjustment. It is required that your finished opening be a whole number measurement only. Please note: The Unidoor, Unidoor Plus, and Unidoor Lux require double studs or wood blocking behind your finished wall where the door hinges will be mounted. The Unidoor-X features a glass panel, referred to as a hinged panel, mounted to the wall that the moving panel is then installed to. Depending on the size of your opening, there may be a stationary panel that the door closes to. The Unidoor-X is adjustable up to 1/2" on the stationary side, with 1/4" out-of-plumb adjustment on the hinged panel side. The Unidoor-X does not require studs behind your finished walls for installation. Q: What are the differences between Aqua, Aqua Ultra, Aqua Lux, Aqua Uno, Aqua Swing, and Aqua Fold? A: The Aqua has 1/4" thick glass. The moving door has hinges that attach to a stationary panel and the panel is attached to your wall by a wall and glass profile system. The wall profile is a 2" wide metal channel that the stationary panel slides into, making the Aqua a semi-frameless unit. The Aqua does offer the fullest range of out-of-plumb adjustment (3/8”). The Aqua Ultra has 5/16" thick glass. The moving door has hinges that attach to the stationary panel and the panel is attached to the wall with a "U-Channel". The "U-Channel" is 1" wide and the stationary panel slides into it, giving a more frameless look than the Aqua, but with only a 1/4” of out-of-plumb adjustment. The Aqua Ultra is a semi-frameless unit. The Aqua Lux has 5/16" thick glass. The moving door has hinges that attach to the stationary panel and the panel is attached to the wall with "wall brackets". The Aqua Lux is a completely frameless unit with no out-of-plumb adjustment. The Aqua Uno and the Aqua Swing are tub doors. The Aqua Uno is a single panel of glass that is attached to the wall with hinges and does not offer any out-of-plumb adjustment. The Aqua Uno opens outward. The Aqua Swing is also a single panel and is attached to the wall with a wall profile system, allowing for 3/8" out-of-plumb adjustment. The Aqua Swing is designed to open inward and outward. The Aqua Fold is DreamLine’s innovative folding and pivoting door,...